 |
| FEATURED PRODUCTS |
|
|
|
 NEW!
Steeda's high flow air intake for the 2.5L Fusion is 2 intakes in one all inclusive kit! Our high flow cold air intake includes an insert allowing you to use it as a direct bolt on intake kit with no tuning required, or remove the insert to for even more airflow and combine it with a custom tune for THE most powerful kit on the market for your Fusion. Gain of up to 9hp and 10ft/lbs of torque are possible with the insert in place. More to be had with no insert and custom tuning. |
|
 LIFETIME WARRANTY!
Steeda Fusion cold air kit is supplied with a stainless steel air box with built-in velocity stack and CNC billet aluminum mass air meter. It mounts in the factory location with the supplied rubber trim. Our tests showed inlet temps a mere 10 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All stainless steel hardware required for installation is included in the kit. We've seen gains of up to 30 horsepower! |
 |
|
|
|
|
 |
|
|
 HOT ITEM!
Steeda's Billet Aluminum intake spacer is designed specifically for the new Ford Fusion. Made from Billet 6061 aluminum it is designed to give you more plenum volume for increased horsepower. |
|
 FREE UP HORSEPOWER
Fluidampr crankshaft harmonic balancers feature a laser welded housing with an internal inertia ring containing silicone viscous fluid between the housing and inertia ring. |
|
|
|
|
|
|
|
|
 EASY TO USE!
Just like the Xcalibrator evolved into the Xcalibrator 2, the evolution continued with SCT's Xcalibrator 3 flash tuner! The New Xcalibrator 3 flash tuner by SCT comes pre-programmed but also functions as a custom tuner allowing up to 3 custom tunes for vehicles not supported by its pre-programmed files or for custom applications. The new Xcalibrator 3 features a much larger backlight display making it easier to display and read. |
|
 GREAT RIDE QUALITY!
Springs are the foundation of good handling. So start with the best. Our experience and expertise in high performance street and racing suspension systems is second to none. Put that experience to work for you. Steeda springs are all custom made to our specifications and were developed in conjuction with Ford Motor Company engineers through our technology transfer program. |
|
|
|
|
|
|
|
|
 IMPROVE HANDLING!
Steeda's New Rear Swaybar is designed for any 2-wheel drive Ford Fusion. An absolute must for any enthusiast. You will not believe the difference this bar makes! A bolt-in design that replaces the factory rear swaybar with almost double the roll stiffness. Steeda's engineers designed this bar specifically to provide improved handling... |
|
 IMPROVE HANDLING!
Steeda’s rear endlinks for the Ford Fusion are the perfect complement to your Steeda rear swaybar. A polyurethane lower bushing and upper ball joint provides improved load transfer without being harsh like other rod-ended designs available. The threaded shank allows you to adjust the length to better balance your car. |
|
|
|
|
|
|
|
|
 HOT ITEM!
Stiffen your chassis where it needs it. Achieve better handling by allowing your suspension to do its job instead of the chassis flexing first. The Fusion front subframe is designed in the form of a square with no cross supports. The diagonal X of the Steeda brace extends across the sub frame and eliminates the parallelogram affect high loads may cause, unlike the competition... |
|
 REDUCE CHASSIS FLEX
Chassis flex is one of the main enemies of good handling. Your front tires can't stay planted if your strut towers are flexing. Put an end to front-end flex with this easy-to-install tubular strut bar. This bar ties your strut towers together, giving you less flex and therefore better handling. Made from super strong 4130 Chrome Moly steel, comes powdercoated gloss black. |
|
|
|
|
|
|
|
|
 SUPERIOR HANDLING
Steeda's Fusion Handling Pak provides a complete, balanced solution which improves the looks and performance all for a reduced price over purchasing the items individually. |
|
 HOT WHEEL!
This beautiful 18x8 inch wheel is an elegant Mesh Style wheel design for your Ford Fusion, Mercury Milan, or Lincoln Zephyr. Available in black with a polished lip in 18 inch by 8 inch width. |
|
|
|
|
|
|
|
|
 GREAT SOUND!
Get the hottest exhaust system for the Ford Fusion. Magnaflow Stainless Steel Cat-back exhaust system for the new Ford Fusion with 3.0L V6 or 2.3L I4 feature stainless exhaust with polished stainless steel tips. |
|
 ON SALE!
Steeda's Ford Fusion Door Sill Plates were designed specificly to fit your new Ford Fusion. Made from Stainless Steel they are engraved with the Fusion or the Steeda logo. This is a four piece kit and includes a door sill for each door. |
|
|
|
|
|
